Broadcasting
5 Advanced faxing
In this chapter, you will learn how to use the advanced fax features of your machine.
1 The "arrow buttons" located under the
Menu button on the control panel are
designated by 4 t, in the instructions_
Broadcasting
With Broadcasting you can have your HP Fax send your fax to up to 15 (HP t040 Fax)
or 20 (HP 1050 Fax) fax numbers at once_ The documents are automatically erased from
memory when Broadcasting is finished.
1. Turn the document face down and feed it into the machine_
2. PressMenu repeated until ADVANCEDFAX displays and press Start/Entero
3. Select Set Broadcasting by pressing 4 1" and press Start/Entero
4. Enter the fax number_
° You can press Speed Dial and enter a speed dial code_
TIP: One touch buttons do not work in this area, you must use their speed dial code
instead.
• You can enter 15 or 20 (depending or model) fax numbers into one job
5. PressStart/Enter when the correct number appears in the display.
• If you have more destinations, select Y by using 4 t. and press Start/Enter
when asked Another? Y/N and repeat stepsfrom 4o
• If you have finished entering all the numbers, answer _ and press Start/Enter.
6. PressStart/Enter_
The document will be scanned into memory before transmission
Advanced faxing 43
To Next Page
Loading...
Need help?
General
