HP 3600 v2 Series Security Configuration Guide

214
[Device-radius-radsun] secondary accounting 192.168.1.2
[Device-radius-radsun] key authentication name
[Device-radius-radsun] key accounting money
[Device-radius-radsun] timer response-timeout 5
[Device-radius-radsun] retry 5
[Device-radius-radsun] timer realtime-accounting 15
[Device-radius-radsun] user-name-format without-domain
[Device-radius-radsun] quit
# Configure ISP domain sun to use RADIUS scheme radsun for authentication, authorization, and
accounting of all types of users. Specify that the ISP domain can contain up to 30 users.
[Device] domain sun
[Device-isp-sun] authentication default radius-scheme radsun
[Device-isp-sun] authorization default radius-scheme radsun
[Device-isp-sun] accounting default radius-scheme radsun
[Device-isp-sun] access-limit enable 30
[Device-isp-sun] quit
2. Configure 802.1X.
# Set the 802.1X authentication method to CHAP. (This configuration is optional. By default, the
authentication method is CHAP for 802.1X.)
[Device] dot1x authentication-method chap
3. Configure port security.
# Enable port security.
[Device] port-security enable
# Add five OUI values.
[Device] port-security oui 1234-0100-1111 index 1
[Device] port-security oui 1234-0200-1111 index 2
[Device] port-security oui 1234-0300-1111 index 3
[Device] port-security oui 1234-0400-1111 index 4
[Device] port-security oui 1234-0500-1111 index 5
[Device] interface ethernet 1/0/1
# Set the port security mode to userLoginWithOUI.
[Device-Ethernet1/0/1] port-security port-mode userlogin-withoui
Verifying the configuration
# Display the RADIUS scheme radsun.
<Device> display radius scheme radsun
SchemeName : radsun
Index : 1 Type : standard
Primary Auth Server:
IP: 192.168.1.2 Port: 1812 State: active
Encryption Key : N/A
VPN instance : N/A
Primary Acct Server:
IP: 192.168.1.3 Port: 1813 State: active
Encryption Key : N/A
VPN instance : N/A

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English