HP 3600 v2 Series Security Configuration Guide

215
Second Auth Server:
IP: 192.168.1.3 Port: 1812 State: active
Encryption Key : N/A
VPN instance : N/A
Second Acct Server:
IP: 192.168.1.2 Port: 1813 State: active
Encryption Key : N/A
VPN instance : N/A
Auth Server Encryption Key : name
Acct Server Encryption Key : money
Accounting-On packet disable, send times : 5 , interval : 3s
Interval for timeout(second) : 5
Retransmission times for timeout : 5
Interval for realtime accounting(minute) : 15
Retransmission times of realtime-accounting packet : 5
Retransmission times of stop-accounting packet : 500
Quiet-interval(min) : 5
Username format : without-domain
Data flow unit : Byte
Packet unit : one
# Display the configuration of the ISP domain sun.
<Device> display domain sun
Domain : sun
State : Active
Access-limit : 30
Accounting method : Required
Default authentication scheme : radius:radsun
Default authorization scheme : radius:radsun
Default accounting scheme : radius:radsun
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes:
# Display the port security configuration.
<Device> display port-security interface ethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
Index is 1, OUI value is 123401
Index is 2, OUI value is 123402
Index is 3, OUI value is 123403
Index is 4, OUI value is 123404
Index is 5, OUI value is 123405
Ethernet1/0/1 is link-up
Port mode is userLoginWithOUI
NeedToKnow mode is disabled

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English