HP 3600 v2 Series Security Configuration Guide

57
Figure 17 Add an access device
# Add a charging plan.
Click the Service tab, and select Accounting Manager > Charging Plans from the navigation tree to enter
the charging plan configuration page. Then, click Add to enter the Add Charging Plan page and perform
the following configurations:
• Add a plan named UserAcct
• Select Flat rate as the charging template
• In the Basic Plan Settings field, configure the fixed fee as 120 dollars per month
• In the Service Usage Limit field, set the Usage Threshold to 120 hours, allowing the user to access
the Internet for up to 120 hours per month
• Adopt the default settings for other parameters and click OK to finish the operation.
Figure 18 Add a charging policy
# Add a service.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English