HP 5500 HI Series Installation Guide

44
3. Use Telnet, web, or SNMP to access the IRF fabric from the network management station. (See HP
5500 HI Switch Series Fundamentals Configuration Guide.)
4. Check that you can manage all member switches as if they were one node.
5. Display the running status of the IRF fabric by using the commands in Table 7.
Table 7 Displaying and maintaining IRF configuration and running status
To do… Use the command…
Display information about the IRF fabric display irf
Display all members’ configurations that take effect after
switch reboots
display irf configuration
Display topology information about the IRF fabric display irf topology
NOTE:
To avoid IP address collision and network problems, configure at least one multi-active detection (MAD)
mechanism to detect the presence of multiple identical IRF fabrics and handle collisions. For more
information about MAD detection, see
HP 5500 HI Switch Series IRF Configuration Guide .

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English