118
Domain ID : 0
The output shows the following information:
{ The member ID and the priority of the master are 1 and 10 respectively.
{ The member ID and the priority of one subordinate switch are 2 and 9 respectively.
{ The member ID and the priority of the other subordinate switch are 3 and 1 respectively.
During the ISSU upgrade process, you must select subordinate switch 2 as the specified
subordinate switch.
4. Check that the new system software image has been saved in the Flash of each IRF member switch:
# Verify whether the new system software image soft-version2.bin has been saved to the Flash of
the master.
<IRF> dir
Directory of flash:/
0 -rw- 6085 May 29 2010 11:38:45 config.cfg
1 -rw- 10518 Apr 26 2011 12:45:05 logfile.log
2 -rw- 16990742 Apr 26 2011 14:24:11 soft-version1.bin
3 -rw- 17090572 Apr 26 2011 14:13:46 soft-version2.bin
4 drw- - Apr 26 2011 12:00:33 seclog
5 -rw- 287 Apr 26 2011 12:19:52 system.xml
60833 KB total (26734 KB free)
The output shows that the new system software image has been saved to the Flash of the master.
# Verify whether the new system software image soft-version2.bin has been saved to the Flash of
subordinate switch 2.
<IRF> dir slot2#flash:/
Directory of slot2#flash:/
0 -rw- 6085 May 29 2010 11:38:45 config.cfg
1 -rw- 10518 Apr 26 2011 12:45:05 logfile.log
2 -rw- 16990742 Apr 26 2011 14:24:11 soft-version1.bin
3 -rw- 17090572 Apr 26 2011 14:13:46 soft-version2.bin
4 drw- - Apr 26 2011 12:00:33 seclog
5 -rw- 287 Apr 26 2011 12:19:52 system.xml
60833 KB total (26734 KB free)
The output shows that the new system software image has been saved to the Flash of subordinate
switch 2.
# Verify whether the new system software image soft-version2.bin has been saved to the Flash of
subordinate switch 3.
<IRF> dir slot3#flash:/
Directory of slot3#flash:/
0 -rw- 6085 May 29 2010 11:38:45 config.cfg
1 -rw- 10518 Apr 26 2011 12:45:05 logfile.log
2 -rw- 16990742 Apr 26 2011 14:24:11 soft-version1.bin
3 -rw- 17090572 Apr 26 2011 14:13:46 soft-version2.bin