63
Task Command
Remarks
Log off online Web users.
free web-users { all | user-id
user-id | user-name user-name }
Available in user interface view.
Web login control configuration example
Network requirements
As shown in Figure 25, configure the device to allow only Web users from Host B to access.
Figure 25 Network diagram
Configuration procedure
# Create ACL 2000, and configure rule 1 to permit packets sourced from Host B.
<Sysname> system-view
[Sysname] acl number 2030 match-order config
[Sysname-acl-basic-2030] rule 1 permit source 10.110.100.52 0
# Associate the ACL with the HTTP service so only Web users from Host B are allowed to access the
device.
[Sysname] ip http acl 2030
To Next Page
Loading...
Need help?
General
