28
Figure 9 Password authentication interface for console login
Configuring scheme authentication for console login
Follow these guidelines when you configure scheme authentication for console login:
• To make the command authorization or command accounting function take effect, apply an
HWTACACS scheme to the intended ISP domain. This scheme must specify the IP address of the
authorization server and other authorization parameters.
• If the local authentication scheme is used, use the authorization-attribute level level command in
local user view to set the user privilege level on the device.
• If a RADIUS or HWTACACS authentication scheme is used, set the user privilege level on the
RADIUS or HWTACACS server.
To configure scheme authentication for console login:
Ste
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter AUX user interface
view.
user-interface aux first-number
[ last-number ]
N/A
To Next Page
Loading...
Need help?
General
