HP 5830 series User Manual

68
Task Command Remarks
Display the help information of
FTP-related commands on the FTP server.
remotehelp [ protocol-command ] N/A
Enable displaying detailed prompt
information received from the server.
verbose Enabled by default.
Enable FTP related debugging when the
device acts as the FTP client.
debugging Disabled by default.
Terminating the FTP connection
To terminate an FTP connection, perform one of the following tasks:
Task Command Remarks
Terminate the FTP connection without exiting FTP
client view.
• disconnect
• close
Use either command in FTP
client view.
Terminate the FTP connection and return to user
view.
• bye
• quit
Use either command in FTP
client view.
FTP client configuration example
Network requirements
As shown in Figure 27, the IRF fabric that comprises two member devices acts as the FTP client and the
PC acts as the FTP server. The IRF fabric and the PC can reach each other. An account with the username
abc and password abc is already configured on the FTP server.
Log in to the FTP server from the FTP client, download the file newest.bin from the FTP server to the FTP
client, and upload the configuration file config.cfg from the FTP client to the FTP server for backup.
Figure 27 Network diagram
Configuration procedure
# Examine the storage medium of the device for insufficiency or impairment. If no sufficient free space is
available, use the delete/unreserved file-url command to delete unused files. (Details not shown.)
# Log in to the server at 10.1.1.1 through FTP.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1 ...

HP 5830 series Specifications

General

Brand	HP
Model	5830 series
Category	Switch
Language	English