HP 5830 series User Manual

15
Configuring the user privilege level directly on a user interface
To configure the user privilege level directly on a user interface that uses the scheme authentication mode:
Ste
p
Command Remarks
1. Configure the authentication
type for SSH users as
publickey.
For more information, see Security
Configuration Guide.
Required only for SSH users who
use public-key authentication.
2. Enter system view.
system-view N/A
3. Enter user interface view.
user-interface { first-num1
[ last-num1 ] | vty first-num2
[ last-num2 ] }
N/A
4. Enable scheme
authentication.
authentication-mode scheme
By default, password
authentication is enabled for VTY
users, and authentication is
disabled for AUX users.
5. Configure the user privilege
level.
user privilege level level
By default, the user privilege level
for users logged in through the
AUX user interface is 3, and that
for users logged in through the
other user interfaces is 0.
To configure the user privilege level directly on a user interface that uses the none or password
authentication mode:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter user interface view.
user-interface { first-num1
[ last-num1 ] | { aux | vty }
first-num2 [ last-num2 ] }
N/A
3. Configure the authentication
mode for any user who uses
the current user interface to
log in to the device.
authentication-mode { none |
password }
By default, password
authentication is enabled for VTY
users, and authentication is
disabled for AUX users.
4. Configure the privilege level
of users logged in through the
current user interface.
user privilege level level
Optional.
By default, the user privilege level
for users logged in through the
AUX user interface is 3, and that
for users logged in through the
other user interfaces is 0.
For example:
# Display the commands a Telnet user can use by default after login.
<Sysname> ?
User view commands:
display Display current system information
ping Ping function
quit Exit from current command view
rsh Establish one RSH connection

HP 5830 series Specifications

General

Brand	HP
Model	5830 series
Category	Switch
Language	English