5. After the router boots (which takes only a few seconds), you will see
the speed sensing prompt:
Waiting for speed sense.
or a line of garbled characters.
Press [Return] one or more times, as necessary, to re-synchronize the
router with the console and to display the copyright screen.
6. When the copyright screen appears:
• If the password prompt appears, type the password and press
[Return] to display the Main menu.
(Use the manager password if you have one and will be doing any
tasks requiring it, such as setting the date and time (next step).
The subsequent step, “Set Manager and User Passwords” (page
1-28), describes which tasks require the password. Otherwise, use
the user password.)
• If, instead, this message appears:
Press any key to continue
Press [Return] to display the Main menu.
Password Prompt
(appears only if password set)
Figure 1-16. Copyright Screen
Installation
Configure and boot the router.
1-24
To Next Page
Loading...
