3. At the prompt, enter the Time command with the date and time:
time mm/dd/yy hh:mm:ss [Return]
where:
mm = month hh = hour
dd = day mm = minutes
yy = year ss = seconds
4. Use the Exit command to exit from NCL and return to the Main
menu:
exit [Return]
Note For details on the Time command and other NCL commands, refer to
chapter 16 of the Operator’s Reference.
NCL Prompt
Figure 1-17. NCL Screen with Default Prompt
Installation
Set the correct time and date.
1-26
To Next Page
Loading...
