HP 650 User Manual

1. At the Main menu (see figure 1-14), press [2] to select “Network Con-
trol Language Interpreter.” The NCL prompt—DEFAULT_CONFIG:
or another system name you have configured—then appears at the
bottom of the screen, as shown in figure 1-18.
2. At the prompt, enter the Password command:
password [Return].
3. Follow the prompts to set the manager password.
4. To set the user password, repeat steps 2 and 3, substituting the user
password for the manager password in step 3.
NCL Prompt
Figure 1-18. NCL Screen with Default Prompt
Installation
Set manager and user passwords.
1-28

HP 650 Specifications

General

RAM	Up to 8GB DDR3
Display	15.6-inch HD (1366x768)
Graphics	Intel HD Graphics
Operating System	Windows 7 / Windows 8
Battery	6-cell Li-ion
Optical Drive	DVD±RW
Wireless	802.11b/g/n
Processor	Intel Celeron, Pentium, or Core i3/i5/i7 (various models available)