Managing images on the camera 13
Managing images
on the camera
After you have taken some pictures, you can view them with the
camera’s image display. You can view a single image, portions of
an image (using the magnify feature), or a group of images (using
the display feature). You can also delete images, lock them (to
avoid accidental deletion), and create a print order to print a set of
photos at a later time.
Tip To preserve battery life, connect an AC power
adapter (optional) while using the image display.
Viewing your images
1 Press the PLAY ( ) button to turn on the image display. The
last picture you took or viewed appears on the image display.
2 Use the controller to scroll through your images.
Each time a new image appears on the display, a status overlay
bar also appears for a few seconds.
The status overlay bar gives you the following information about
the current image:
Date and time the picture was taken
Image quality setting used to take the picture
Print order status (the Printer symbol appears only if an image
is marked for digital print order format [DPOF])
Lock status (the Lock symbol appears only if an image is
locked)
File name information from the CF memory card
3
HUG.book Page 13 Tuesday, September 25, 2001 1:03 PM
To Next Page
Loading...
Need help?
General
