Adjusting the camera settings 27
Adjusting the image display
brightness
You can adjust the brightness of the image display for different
lighting conditions. For example, if you are using the camera in
bright sunlight, you might want to increase the image display
brightness to improve the visibility of the display.
To set the image display brightness
1 Press the button to turn on the image display.
2 Press the button to open the main menu, use the down side
of the controller to select the Setup menu, and then press
OK.
3 Use the up or down side of the
controller to scroll to
Brightness, and then press
OK.
4 Use the right side of the
controller to increase the
brightness or use the left side
of the controller to
decrease the brightness.
5 Press
OK.
HUG.book Page 27 Tuesday, September 25, 2001 1:03 PM
To Next Page
Loading...
