Sharing and printing images 31
Installing the software on a Windows
computer
1 Insert the HP photosmart 715 CD-ROM into the computer’s
CD-ROM drive. The installation window automatically appears.
Note If the installation window does not appear, click
Start, and then click Run. Type
X
:\Setup.exe,
where
X
is the letter of your CD-ROM drive.
2 Click Next, and then follow the instructions on the screen to
install the software.
Certain versions of the camera are shipped with bonus software.
Keep the HP photosmart 715 CD-ROM in the computer’s
CD-ROM drive and continue to the next section to install the
bonus software.
To install the bonus software
1 Click Start, click Run, and in the Open box, type
X
:\Bonus\setup.exe (where
X
is the drive letter assigned to
your CD-ROM drive).
2 Click OK, and then follow the instructions on the screen to
install the bonus software.
Connecting the camera to a Windows
computer
Before connecting the camera to your computer, make sure you
have installed the software.
Note The camera uses a USB connection, so you do not
need to turn the computer off when connecting or
disconnecting the camera.
HUG.book Page 31 Tuesday, September 25, 2001 1:03 PM
To Next Page
Loading...
Need help?
General
