Adjusting the camera settings 25
Setting Instant Review
Turn on Instant Review if you want your images to automatically
appear on the display immediately after you take them. While an
image is shown on the display, you can choose to save or delete
it.
Note If you decide that you do not want to review every
picture immediately after you take it, turn Instant
Review off to conserve battery power.
To turn Instant Review on or off
1 Press the button to turn on the image display.
2 Press the button to open the main menu, use the down side
of the controller to select the Setup menu, and then press
OK.
3 Use the down side of the controller to select Instant
Review.
4 Use the right or left side of the controller to select On or
Off, and then press
OK.
5 Press the button to exit the Setup menu.
HUG.book Page 25 Tuesday, September 25, 2001 1:03 PM
To Next Page
Loading...
