Adjusting the camera settings 21
Adjusting the
camera settings
You can modify the camera settings to fit the current picture-taking
conditions and your preferences. For example, you can adjust the
flash settings to fit current lighting conditions, and you can use the
self-timer to take a picture with yourself in it. This chapter
describes how to:
use the flash.
change the image quality.
set the instant-review option.
change the date and time.
adjust the image display brightness.
turn the system beep off and on.
change the language.
Using the flash
The camera offers four flash settings. The current flash setting is
indicated by a symbol on the status LCD. Each time you turn the
camera off and then on again, the flash setting automatically
reverts to AUTO FLASH.
Symbol Setting Description
AUTO FLASH The camera determines the need
for a flash based on the lighting
conditions. The flash setting reverts
to AUTO FLASH each time you
turn on the camera.
4
HUG.book Page 21 Tuesday, September 25, 2001 1:03 PM
To Next Page
Loading...
Need help?
General
