HP photosmart 715 user guide26
Changing the date and time
The camera has a real-time clock that records the date and time at
which you take each picture. The camera prompts you to enter the
date and time under the following circumstances:
When you turn on the camera for the first time.
If the camera was without battery power (the batteries lost
power or were removed from the camera) for an extended
period of time.
Note For your convenience, the camera maintains the
date and time for at least 15 minutes after you
remove old batteries.
To change the date and time
1 Press the button to turn on the image display.
2 Press the button to open the main menu, use the down side
of the controller to select the Setup menu, and then press
OK.
3 Press the down side of the controller to select Date &
Time, and then press
OK.
4 Press the right or left side of the controller to set the day,
and then press the down side of the controller to select the
next field.
5 Set the month, year, hour, minute, and date format using the
controller, and then press
OK.
6 To confirm the date and time, press
OK.
HUG.book Page 26 Tuesday, September 25, 2001 1:03 PM
To Next Page
Loading...
Need help?
General
