HP 830 - Page 33

29
* *
* HP 830 BootWare, Version 2.00 *
* *
****************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
Compiled Date : Jan 8 2013
CPU Type : XLS208
CPU L1 Cache : 32KB
CPU Clock Speed : 750MHz
Memory Type : DDR2 SDRAM
Memory Size : 512MB
Memory Speed : 533MHz
BootWare Size : 768KB
Flash Size : 1024MB
CPLD Version : 006
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl + B at the prompt within 4 seconds to access the Boot menu, or wait for the system to
automatically start up. To access the BootWare menu after the system software image files are
decompressed, you must restart the switch.
Starting to get the main application file--flash:/main.bin!............................
............................................
The main application file is self-decompressing ........................................
.....................................................................................
...
.....................................................................................
...
.........Done!
System application is starting...
User interface con0 is available.
Press ENTER to get started.
Press Enter at the prompt, and you can configure the switch when the prompt <HP> appears.
During the startup process, the CPLD is automatically upgraded to the latest version, if any.
After the upgrade process, the system will display this message: "The board cpld update successfully,
please repower device." At this prompt, power off and restart the switch so that the new CPLD version
takes effect.