HP 8560E - Page 40

Chapter 1 39
General Information
Recommended Test Equipment
Cable, 50 Ω
coaxial
Connectors: BNC (m) HP 10503A
P,A,V
(five required) Length: ≥ 122 cm (48 in.)
Cable Frequency range: 30 Hz to 26.5 GHz 8120-4921
P,A,M,V
(two required) Maximum SWR: <1.4 at 26.5 GHz
Maximum insertion loss: 3 dB
Connectors: APC 3.5 (m), both ends
Length: ≥ 61 cm (24 in.)
Cable Frequency range: 30 Hz to 50 GHz 8120-6164
P,A,V,T
(for HP 8564E Maximum SWR: <1.55 at 50 GHz
and HP
8565E)
Maximum insertion loss: 5.75 dB
Connectors: 2.4 mm (f) to 2.4 mm (m)
Length: ≥ 1 m (39 in.)
Cable, HP-IB Required w/operation verification software HP 10833B
P,A,M
(eight
required)
Required w/HP 85629B test & adjustment module
Length: 2 m (6.6 ft.)
Adapters
Adapter Type N(f)-to-BNC(m) 1250-1477
P,A
Adapter Type N(m)-to-BNC(f) 1250-1476
P,A,V
(three
required)
Adapter Type N(f)-to-BNC(f) 1250-1474
P,V
Adapter Type N(m)-to-N(m) 1250-1475
P
Adapter Type N(f)-to-APC 3.5(m) 1250-1750
A
Adapter Type N(m)-to-APC 3.5(m) 1250-1743
P,M,V
(two required)
Adapter Type N(m)-to-APC 3.5(f) 1250-1744
P,V
* Part of microwave workstation
P = performance tests; A = adjustments; M = test & adjustment module; T = troubleshooting;
V = operation verification
Table 1-3 Recommended Test Equipment
Instrument Critical Specifications for Equipment Substitution Recommended
Model
Use