ES User’s Guide 4-75
Using Instrument Functions
Connecting and Configuring Printers and Plotters
Defining a Printer Make the following selections in the analyzer menus:
1. Press to restore the default parameters for a
printer. The defaults are:
2. Select the type of printer you have: either or
.
3. Select the orientation of the paper to the information printed, either
or . The portrait choice orientates the
printout vertically, the landscape orientates the printout horizontally.
4. If you do not want auto feed active, press .
5. Press to change the printer resolution, margins, and
print width:
a. : Refer to the following table for some
specific printers and their valid print resolutions.
Parameter Default
Monochrome/Color
Orientation
Auto Feed
Printer Resolution
Top Margin
Left Margin
Print Width
Monochrome
Portrait
ON
96 Dots Per Inch
0.00 mm
0.00 mm
150 mm (5.91 in)
To Next Page
Loading...
