8-6 ES User’s Guide
Hardkey/Softkey Reference
A
Softkey in the mod kit save/recall menu that allows you to enter your
own description of a user-defined calibration kit.To enter the
description, it is fastest and easiest to use a keyboard connected to the
analyzer DIN KEYBOARD connector. If you don’t have a keyboard, you
can use the analyzer keys or the front panel knob and the
key to select and enter characters from the top of the
analyzer’s display. Press when done.
See Chapter 6, “Calibrating for Increased Measurement Accuracy,” for
more information.
Access Keys:
Softkey in the limit menu. Displays the menu to add limit lines or
points to the limit table.
See “Using Limit Testing” on page 4-28 for detailed information on
using limit lines.
Access Keys:
Softkey in the users setup menu. Displays dialog boxes for entering
login user/password pairs to the access list of your analyzer.
See The LAN Interface User’s Guide Supplement for more information.
Access Keys:
Softkey in the add limit menu. Displays the menu to add a maximum
limit line.
See “Using Limit Testing” on page 4-28 for detailed information on
using limit lines.
Access Keys:
Softkey in the add limit menu. Displays the menu to add a maximum
limit point.
See “Using Limit Testing” on page 4-28 for detailed information on
using limit lines.
Access Keys:
CAL
DISPLAY
SYSTEM OPTIONS
DISPLAY
DISPLAY
To Next Page
Loading...
