HP 8712ES - Page 313

ES User’s Guide 8-7
Hardkey/Softkey Reference
A
Softkey in the add limit menu. Displays the menu to add a minimum
limit line.
See “Using Limit Testing” on page 4-28 for detailed information on
using limit lines.
Access Keys:
Softkey in the add limit menu. Displays the menu to add a minimum
limit point.
See “Using Limit Testing” on page 4-28 for detailed information on
using limit lines.
Access Keys:
Softkey in the menu that turns off all of the markers, the
delta marker, and marker tracking on the active measurement
channel.
See “Using Limit Testing” on page 4-28 for detailed information on
using markers.
Formats the real-time internal clock to display the first three letters of
the month rather than a number (for example, Mar for March instead
of 03).
Access keys:
Softkey in the menu. When alternate sweep is toggled ON,
the analyzer shows the operation of different instrument states on its
two displayed measurement channels. The settings of the two
measurement channels can differ: frequency span, detection option
type, number of points, system bandwidth, trigger, sweep time. When
alternate sweep is off, the preceding settings match. Note: some
settings, such as power level, always match.
Softkey in the menu. Displays the menu of measurements
suitable for amplifier measurements: S
11
, S
21
, S
12
, S
22
, and power.
Add Min Line
DISPLAY
Limit Menu
Add Limit
Add Min Point
DISPLAY
Limit Menu
Add Limit
All Off
MARKER
Alpha
SYSTEM OPTIONS
System Config
Set Clock
Clock Format
Alt Sweep
on OFF
SWEEP
Amplifier
BEGIN