HP 8712ES - Page 373

ES User’s Guide 8-67
Hardkey/Softkey Reference
P
Softkey in the mod kit save/recall menu. Presets all of the User Cal
Kits to the type-N(f) calibration kit. This reduces the size of your saved
instrument state since user-defined calibration kits (Cal Kits A–J)
aren’t included in the saved information.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
Softkey in the mod kit save/recall menu. Presets the selected User Cal
Kit to the type-N(f) calibration kit. This reduces the size of your saved
instrument state since the user-defined calibration kit isn’t included in
the saved information.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
Softkey in the more printer menu. Sets print width (printing space) in
mm.
See “Connecting and Configuring Printers and Plotters” on page 4-68
for more information.
Access Keys:
Softkey in the select copy port menu. Sets the recognized address of
HP-IB printers and plotters only. The default address is 5. The
"recognized HP-IB address" is the address that the network analyzer
uses to communicate with the device. The actual address of the device
must be set independently to match.
See “Connecting and Configuring Printers and Plotters” on page 4-68
for more information.
Access Keys:
Preset All
User Kits
CAL
More Cal
Cal Kit
Modify (connector type)
Mod Kit SaveRecall
Preset
User Kit
CAL
More Cal
Cal Kit
Modify (connector type)
Mod Kit SaveRecall
Print Width
HARDCOPY
Define Printer
More Printer
Print/Plot
HP-IB Addr
HARDCOPY
Select Copy Port