8-68 ES User’s Guide
Hardkey/Softkey Reference
P
Softkey in the more printer menu. Sets printer resolution in terms of
dots per inch. Check the printer manual for the appropriate setting.
Default is 96 dots per inch.
See “Connecting and Configuring Printers and Plotters” on page 4-68
for more information on printer resolution.
Access Keys:
Softkey in the menu. Displays the menu to save,
re-save, recall programs, or save a program as an autostart (AUTOST)
program.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Softkey in the menu. Allows you to set a power level (other
than the factory default of 0 dBm) that the analyzer will always return
to when the key is pressed. Be sure to terminate
your entry with one of the softkeys or the key.
Softkey in the menu. Leads to the power sweep ranges
menu. There are seven predetermined power ranges to choose from.
See the entry in this chapter for more information on
the power sweep function.
HARDCOPY
SAVE RECALL
POWER
ENTER
POWER
To Next Page
Loading...
