HP 8712ES - Page 390

8-84 ES User’s Guide
Hardkey/Softkey Reference
S
Softkey in the source . Displays selections for spur avoidance:
dither, spur avoid, or none.
(Option 100 only) Softkey in the cable or measurement menus. Selects
the structural return loss (SRL) measurement. See your Option 100
User's Guide Supplement for information.
Access Keys: or or
Softkey in the utilities menu. Allows you to set the number of bytes in
the stack size by using the analyzer’s numeric keypad.
Access Keys:
Softkey in two menus: and .
1. In menu, sets the start frequency of the source. Minimum
frequency is 300 kHz. When start is selected, the other frequency
parameter that must be defined is stop.
See “Entering Measurement Parameters” on page 2-4 for more
information.
2. In menu, starts print or plot as set in the select copy
port menu.
See “Printing and Plotting Measurement Results” on page 4-78 for
more information.
Softkey in the secure menu that is used with the IBASIC feature of the
instrument.
See the HP Instrument BASIC User's Handbook for information on the
secure function.
Access Keys:
Softkey in the menu. Sets the starting point (in dBm) for a
power sweep measurement. in the menu
must be selected before setting the start and stop power points.
See the entry in this chapter for more information on
the power sweep function.
Spur Avoid
Options
MENU
SRL
BEGIN
Cable
MEAS 1 MEAS 2
Stack Size
SYSTEM OPTIONS
IBASIC
Utilities
Start
FREQ HARDCOPY
FREQ
HARDCOPY
Start Line #
SYSTEM OPTIONS
IBASIC
Utilities
Secure
Start Power
POWER
Power Sweep
SWEEP
Power Sweep