8-88 ES User’s Guide
Hardkey/Softkey Reference
S
Softkey in the menu. Displays the menu to
adjust the clock setting, set the beeper volume, adjust the CRT
settings, and configure the rear panel USER TTL IN/OUT port.
Softkey in the HP-IB menu. Makes the network analyzer the system
controller of the HP instrument bus. Required mode for interfacing
with HP-IB peripherals (printers, plotters, and disk drives). Also
required by IBASIC to talk to HP-IB peripherals. This operation mode
is not selectable with another active controller on the bus.
See the Programmer's Guide for more information.
Access Keys:
Hardkey in the SYSTEM area of front panel.
Softkey in the cal kit menu. Provides access to the system impedance
menu.
Refer to “When to Change the System Impedance” on page 3-12 for
more information.
Access Keys:
SYSTEM OPTIONS
SYSTEM OPTIONS
SYSTEM
OPTIONS
CAL
To Next Page
Loading...
