ES User’s Guide 11-9
Factory Preset State and Memory Allocation
Factory Preset and Peripheral States
SYSTEM OPTIONS Key Settings
1. This address cannot be changed.
2. This address cannot be changed from the front panel of your ana-
lyzer. It can only be changed using the "*PCB" command. See your
Programmer's Guide for details.
Analyzer HP-IB Address 16
System Controller/Talker Listener Talker Listener
Power Meter HP-IB Address
1
13
System Controller Address
2
21
User TTL Config Softkey Auto-Step
Clock:
Format YYYY-MM-DD HH:MM:SS
Numeric/Alpha Numeric
Seconds On
HP-IB:
Status Talker/Listener
SRE Register 0
ESE Register 0
PSC Flag 1
LAN
LAN state On
HP 87xxx IP Address 0.0.0.0
Gateway IP Address 0.0.0.0
Subnet Mask 0.0.0.0
To Next Page
Loading...
