1-12 ES User’s Guide
Installing the Analyzer
Step 4. Configure the Analyzer
• The VIDEO OUT COLOR VGA port allows you to connect a color
VGA monitor for enhanced viewing. See “Using an External VGA
Monitor” in Chapter 4 for more information.
• The LAN ETHERTWIST connector is for connecting your analyzer to
a LAN (local area network) for control and access. See The LAN
Interface User’s Guide Supplement for information on how to use your
analyzer in a LAN.
HP-IB
Connections
An HP-IB system may be connected in any configuration as long as the
following rules are observed:
• The total number of devices is less than or equal to 15.
• The total length of all the cables used is less than or equal to 2 meters
times the number of devices connected together up to an absolute
maximum of 20 meters. For example, the maximum cable length is 4
meters if only 2 devices are involved. The length between adjacent
devices is not critical as long as the overall restriction is met.
See Figure 1-5 for different connection configurations.
To Next Page
Loading...
Need help?
General
