HP 9000 Series Instruction Manual

46 Chapter3
100Base-TX Resources
Logging Messages
connection between the adapter in slot 2 and the hub or
switch.
• To examine just the log messages in the log file.
netfmt -f /var/adm/nettl.LOG00
• To check network logging and tracing status.
nettl -status
• To start 10/100Base-TX tracing to the file /tmp/tracefile.TRC0.
nettl(1m) adds the .TRC0 postfix for you.
nettl -traceon all -entity LAN100 -file /tmp/tracefile
• To stop 100Base-TX tracing.
nettl -traceoff -entity LAN100
• To format the 10/100Base-TX trace file into the file /tmp/traceout.
netfmt -f /tmp/tracefile.TRC0 > /tmp/traceout
Refer to the netfmt(1M) man page for further information about this card
and how to create a filter for trace formatting.
Download from Www.Somanuals.com. All Manuals Search And Download.

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome