HP 9000 Series Instruction Manual

Chapter 3 45
100Base-TX Resources
Logging Messages
Logging Messages
HP 100Base-TX/9000 uses the nettl(1M) logging and tracing facility
supplied with HP-UX. You may access the logging and tracing utility
using either the graphical user interface (GUI) version or the command
line interface.
Features of the GUI version, which are now a part of your HP 9000
system, include:
• An interface which guides you through logging and tracing tasks.
• An interface which allows you to create and format reports.
• The capability to collect logging and tracing subsystem-specific
information.
• Report screens which are updated instantaneously with current
logging and tracing information by the subsystem.
• Context-sensitive on-line help.
To access the GUI version of the logging and tracing utility, run the
command:
nettladm
See the nettladm(1M) man page for information on using the GUI
version, or the nettl(1M) manual (man) page for information on using the
command line interface.
Listed below are some example commands using the command line
interface.
• To examine the log file with cause and action descriptions.
netfmt -v -f /var/adm/nettl.LOG00 | more
The -v option enables the reporting of available cause and action
descriptions for each log message. A sample 10/100Base-TX log
message using the -v option is shown below.
******100 Mb/s LAN/9000 Networking**********************
Fri Aug 30 PDT 1996 15:08:07.091398 DISASTER
Subsys:LAN100 Loc:00000
<6011> HPPB 10/100Base-T driver detected bad cable
Download from Www.Somanuals.com. All Manuals Search And Download.

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome