Chapter 4 71
Troubleshooting 10/100Base-TX/9000
Diagnostic Flowcharts
Flowchart 4A Procedures
A. Execute: netfmt. Use the netfmt command to view log
data (error and disaster messages). An example netfmt
command is shown below:
netfmt -v -f /var/adm/nettl.LOG00 | more
Extend the search to LOG01 as information may have
rolled (overflowed) into this file from LOG00.
B. Check causes and actions on display in the
formatted log output.Use the time stamp to find the
proper logs. Ensure that you are looking at the
10/100Base-TX information.
C. Problem solved. If yes, go to flowchart 1. If not,
contact your HP representative.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
