HP 9000 Series Instruction Manual

60 Chapter4
Troubleshooting 10/100Base-TX/9000
Diagnostic Flowcharts
Flowchart 2: 10/100Base-TX Connections/LED Test
Figure 4-2
2
Check:
Power outlet
D
Test LED = ON
100 Mbit port LED=ON
10 Mbit port LED=OFF
LED Display:
?
Check status of
Test Error Message
?
Link
LED = OFF
?
B
E
H
yes
no
no
no
LEDs
on Screen (dmesg ouput)
Reset card. Call HP if
problem persists.
yes
1
10, 100, Link, and Activity
2a
yes
Check connection to hub
1
or switch.
Ensure hub/switch is
C
F
G
I
1
Power
LED =ON
?
A
yes
no
10Base-T or 100Base-TX.
Reset card.
Check card installation.
Reset card. Call HP if
problem persists.
Check card installation.
Download from Www.Somanuals.com. All Manuals Search And Download.

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome