HP 9000 Series Instruction Manual

74 Chapter4
Troubleshooting 10/100Base-TX/9000
Diagnostic Flowcharts
ifconfig entry in /etc/rc.config.d/netconf? Check
that there is an entry in the /etc/rc.config.d/netconf file
for your 10/100Base-TX card.
I. Add ifconfig command to /etc/rc.config.d/netconf
file. Add the ifconfig command to
/etc/rc.config.d/netconf, and reboot. For more
information, refer to the ifconfig(1M) online man page.
Go to flowchart 1 to verify that the problem has been
solved.
Download from Www.Somanuals.com. All Manuals Search And Download.

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome