EasyManuals Logo

HP A4500A - VMEbus Single Board Computer 744 Motherboard User Manual

HP A4500A - VMEbus Single Board Computer 744 Motherboard
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
A-Class Server Installation
A-Class Server Power Up and Boot Procedures
Chapter 2
56
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Reply from 192.0.0.192: bytes=32 time=10ms TTL=255
Return to Configure the Web Browser and Configure The integrated A-Class Web
Console Software.
Operating System Software Installation
HP-UX may be installed from removable media (DDS or CDROM) or via a LAN
(Ignite-UX). A-Class servers require a server firmware version of 39.32 or later to use
Ignite-UX. A-Class server firmware is Customer installable and is available as a
firmware patch from the Hewlett Packard Information Technology Resource Center
(HPITRC) at http://us-support2.external.hp.com/. Refer to patch installation instructions
to install this firmware patch on A-Class servers. Refer to the web-based documentation
at http://docs.hp.com/ for information on how to configure and use Ignite-UX.
This is a temporary solution for rebuilding an A-Class system from removable media
(diskette or CD) only. This procedure is required because the 10.20 Core Install media
does not include the “btlan3” drivers that you will need for networking support. This
solution is for the HP-UX 10.20 operating system with an Independent Peripheral
Release (IPR) of October 198 (9810) only. It is not needed for HP-UX 11.0 IPR 9810.
Step 1. Install HP-UX 10.20 for HP 9000 series 800 servers from removable media:
Load Core Install media into either CDROM or DDS.
Change Alternate Path to match the path of the device containing the install media.
Boot from alternate path
If you are using a DDS: The console will display:
Main Menu>
Type: co Press
Enter.
The console will next display:
Configuration Menu>
Type: pa alt 8/16/5.0 Press
Enter. The console will next display:
Configuration Menu>
Type: au bo on Press
Enter. The console will next display:
Configuration Menu>
Type: bo alt Press
Enter.
The following query will then be displayed:
Interact with IPL (Y, N, or Cancel)?
Type: no Press
Enter.
The console will then display a menu. Select:

Table of Contents

Other manuals for HP A4500A - VMEbus Single Board Computer 744 Motherboard

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A4500A - VMEbus Single Board Computer 744 Motherboard and is the answer not in the manual?

HP A4500A - VMEbus Single Board Computer 744 Motherboard Specifications

General IconGeneral
BrandHP
ModelA4500A - VMEbus Single Board Computer 744 Motherboard
CategoryServer
LanguageEnglish

Related product manuals