To Next Page

To Previous Page

5. Repeat steps 1–4 for the other mounting rail.

WARNING! To reduce the risk of personal injury or equipment damage, be sure that the

rack is adequately stabilized before sliding the inner slides into the slide mounting bracket

assemblies.

6. To install the side rails on each side of the server, align each side rail to the server, and snap

it into place.

7. Slide the server onto the mounting rails and into the rack.

Installing the server into a seismic rack 21

Questions and Answers:

Need help?

Do you have a question about the HP Carrier-Grade rx2800 i2 Server DC and is the answer not in the manual?

HP Carrier-Grade rx2800 i2 Server DC Specifications

General

Form Factor	2U Rack
Product Type	Carrier-grade server
Memory Type	DDR3
Hard Drive Interface	SAS
Storage	Up to 8x 2.5-inch SAS HDDs/SSDs
Power Supply	Redundant Power Supplies
Operating System	HP-UX
Operating System Support	HP-UX
Processor	Intel Itanium Processor 9300 series
Memory	Up to 384 GB (24 DIMM slots)