HP Carrier-Grade rx2800 i2 Server DC User Manual

4. Select Commit Changes and Exit to save the new settings and return to the Boot Maintenance
Manager.
Console options
The Console Options menu is not currently supported. Use the conconfig command from the
UEFI Shell to set console options.
Boot from file
Use this option to manually run a specific application or driver.
NOTE: This option boots the selected application or driver one time only. When you exit the
application, you return to this menu.
1. Select a boot device type.
2. Use the File Explorer menu to locate the correct driver or file.
Set boot next value
Use this option to run the selected boot option immediately upon entering the main Boot Manager
menu. This option is useful for booting an option that only needs to be booted once, without
changing any other setting in the main Boot Manager menu. This is a one-time operation and does
not change the permanent server boot settings.
Using the boot maintenance manager 143

HP Carrier-Grade rx2800 i2 Server DC Specifications

General

Form Factor	2U Rack
Product Type	Carrier-grade server
Memory Type	DDR3
Hard Drive Interface	SAS
Storage	Up to 8x 2.5-inch SAS HDDs/SSDs
Power Supply	Redundant Power Supplies
Operating System	HP-UX
Operating System Support	HP-UX
Processor	Intel Itanium Processor 9300 series
Memory	Up to 384 GB (24 DIMM slots)