Hardware
Startup and Reference Guide—Part 2 2–5
Power Controls
Top: Power Controls
1
Power button* When the notebook is:
■ Off, press to turn on the notebook.
■ On, briefly press to initiate Hibernation.
■ In Standby, briefly press to resume from Standby.
■ In Hibernation, briefly press to restore from
Hibernation.
✎
If the system has stopped responding and
Windows shutdown procedures cannot be
used, press and hold for at least 4 seconds
to turn off the notebook.
2
Display
switch*
■ If the notebook is closed while on, turns off the
display.
■ If the notebook is opened while in Standby, turns
on the notebook (resumes from Standby).
*This table describes default settings. For information about changing the
function of the power button or display switch, see “Setting Power Control
Preferences” in Chapter 4.
CPQ-311245-001.book Page 5 Tuesday, April 1, 2003 3:55 PM
To Next Page
Loading...
