HP E3800 Series User Manual

6 – Index
use to delete ACE … 10-90
use to insert ACE … 10-88
source routing, caution … 10-24, 10-40
standard
command summary … 10-5
configure … 10-50
create … 10-5, 10-50
defined … 10-12, 10-41
delete … 10-50
example … 10-58
named, configure … 10-53
numbered, configure … 10-56
numeric I.D. range … 10-41
remark … 10-5, 10-50
resequence … 10-5, 10-50
sequence number … 10-5, 10-50
structure … 10-42
use … 10-13, 10-51
static port ACL … 10-7, 10-12
application … 10-16
static VLAN requirement … 10-24, 10-33, 10-34
static, defined … 10-3
statistics counters
RACL counter operation … 10-123
supernetting … 10-36
supersede implicit deny any … 10-46
switched packets … 10-34
switch-generated traffic, RACL … 10-128
syntax
See command syntax.
Syslog
See ACL, logging.
TCP control bits … 10-41, 10-59, 10-60, 10-67,
10-69
TCP or UDP port number, IANA … 10-68
TCP, established … 10-41
TCP/UDP operators … 10-68
TCP/UDP, port names … 10-68
terms … 10-8
ToS
numbers and names … 10-66, 10-78
setting … 10-23
traffic
not filtered … 10-31
to/from the switch … 10-35
types filtered … 10-2
traffic types filtered … 10-29
troubleshooting … 10-117
troubleshooting client authentication … 7-20
trunk … 10-34
adding port … 10-34
type … 10-46, 10-51, 10-89, 10-97, 10-100
user-based 802.1X … 10-18
user-based security … 10-18
VACL
configure … 10-7
defined … 10-3
operation defined … 10-14
VACL applications … 10-16
VLAN ACL, IPv4
See VACL.
VLANs … 10-33
where applied to traffic … 10-25, 10-34
wildcard … 10-9, 10-37, 10-38
defined … 10-12
ACL, IPv4 statistics counters, ACE … 10-117
ACL, IPv6
802.1X port-based not recommended … 10-18
display
assignments … 10-101
content of an ACL … 10-103
dual stack … 10-19
implicit IPv6 deny, IPv4-only rule … 7-18
IPv6 traffic implicitly denied … 7-18
limit … 7-42, 10-47
logging
timer … 10-116
loggong
timer … 10-116
monitoring … 10-117
port-based security … 10-19
RADIUS server support … 7-1
RADIUS-assigned ACL
implicit deny IPv6 … 10-17
RADIUS-assigned, implicit deny … 7-18
RADIUS-assigned, limit … 7-42, 10-47
scalability … 7-42, 10-47
statistics counters, ACE, IPv4 … 10-117
TCP control bits … 10-6, 10-59
TCP flag … 10-6, 10-59
troubleshooting client authentication … 7-20
type … 10-101, 10-103
user-based security … 10-19
ACLs
See also RADIUS-assigned ACLs.
address

HP E3800 Series Specifications

General

Model	HP E3800 Series
Layer	Layer 3
Uplink Ports	4 x SFP+ ports
Stacking	Yes
Power over Ethernet (PoE)	Available on some models
Management	Web, CLI, SNMP
Power Supply	Redundant (optional)
Operating Temperature	0°C to 45°C
Dimensions (W x D x H)	440 x 424 x 44 mm
Operating Humidity	10% to 90% non-condensing