EasyManuals Logo

HP Elite 8300 Series Small Form Factor User Manual

HP Elite 8300 Series Small Form Factor
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
Speaker
Description Spare part number
Speaker 645330-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 75).
2. Remove the access panel (
Computer Access Panel on page 123).
3. Remove the front fan assembly (
Front Fan Assembly on page 147).
4. Disconnect the speaker wire from the system board connector labeled SPKR.
5. From the inside of the chassis, remove the two silver Torx T15 screws (1) that secure the
speaker to the chassis.
6. Rotate the top of the speaker downward (2), and then remove it from the chassis.
Figure 7-31 Removing the speaker
To replace the speaker, reverse the removal procedures.
156 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis

Table of Contents

Other manuals for HP Elite 8300 Series Small Form Factor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Elite 8300 Series Small Form Factor and is the answer not in the manual?

HP Elite 8300 Series Small Form Factor Specifications

General IconGeneral
ChipsetIntel Q77 Express
ProcessorIntel Core i7-3770, Intel Core i5-3570, Intel Core i5-3470, Intel Core i3-3220
MemoryUp to 32 GB DDR3
GraphicsIntegrated Intel HD Graphics
Optical DriveDVD-ROM
PortsUSB, DisplayPort, VGA, serial, PS/2, audio in/out
Operating SystemWindows 10, Windows 8, Windows 7, FreeDOS
AudioIntegrated high-definition audio
NetworkGigabit Ethernet
Power Supply240W
Dimensions33.8 x 37.9 x 10.0 cm
WeightApprox. 7.6 kg

Related product manuals