System ID setup page
Setup Field Name Comment Label
Feature Byte Enter the Feature Byte string. The feature
byte string is case sensitive.
The label includes spaces after every four
characters. You can enter or ignore these
spaces – their only purpose is to help with
data entry. There is a character limitation
of 40 bytes per line. When you reach this
limit, go to the next line to continue data
entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the
data will not validate, and the computer
asks you to correct your data input.
Flexbuild
Build ID The Build ID of the unit. Flexbuild
Serial Number Enter the Serial Number of Unit. Support
SKU Number Enter the SKU or Product Number including
Localization Code.
Support
Product Family Pre-populated. Support
System Board CT Number Pre-populated. Also listed under the
barcode on the system board label.
Support
Product Name Enter the Model name/number or
marketing name.
Flexbuild
44 Chapter 4 Removal and replacement procedures – HP Elite Slice Base Module