HP ESA-E Series - Page 173

Chapter 5 5-19
Language Reference
CALCulate Subsystem
Front Panel
Access:
Freq Count, Resolution Auto Man
Frequency Counter Marker
:CALCulate:MARKer[1]|2|3|4:FCOunt[:STATe] OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4:FCOunt[:STATe]?
:CALCulate:MARKer[1]:FCOunt:X?
Turns on or off the marker frequency counter. To query the frequency
counter, use :CALCulate:MARKer[1]:FCOunt:X?
Factory Preset
and *RST: Off
Remarks: If query with frequency count off, 9e15 is returned.
Front Panel
Access:
Freq Count, Marker Count On Off
Marker Function
:CALCulate:MARKer[1]|2|3|4:FUNCtion BPOWer|NOISe|OFF
:CALCulate:MARKer[1]|2|3|4:FUNCtion?
Selects the marker function for the specified marker. To query the value
returned by the function, use :CALCulate:MARKer[1]|2|3|4:Y?
BPOWer is the power integrated within the bandwidth
NOISe is a noise measurement
OFF turns off all functions
Remarks: When a measurement under the front panel MEASURE
key is started, this command is turned off. If this
command is turned on when any of the MEASURE key
measurements are in progress, that measurement will
be stopped.
Front Panel
Access:
Marker, Function
Marker Peak (Maximum) Search
:CALCulate:MARKer[1]|2|3|4:MAXimum
Performs a peak search based on the search mode settings of
:CALCulate:MARKer:PEAK:SEARch:MODE.
NOTE See command :CALCulate:MARKer:PEAK:SEARch:MODE
Front Panel
Access:
Search, Meas Tools, Peak Search