HP ESA-E Series - Page 174

5-20 Chapter5
Language Reference
CALCulate Subsystem
Marker Peak (Maximum) Left Search
:CALCulate:MARKer[1]|2|3|4:MAXimum:LEFT
Places the selected marker on the next highest signal peak to the left of
the current marked peak.
Remarks: The marker will be placed at the next highest peak that
rises and falls by at least the peak excursion above the
peak threshold. If no peak meets the excursion and
threshold criteria, a No Peak Found error (202) is given.
Front Panel
Access:
Search, Next Pk Left
Marker Next Peak (Maximum) Search
:CALCulate:MARKer[1]|2|3|4:MAXimum:NEXT
Places the selected marker on the next highest signal peak from the
current marked peak.
Remarks: The marker will be placed at the highest peak that
rises and falls by at least the peak excursion above the
peak threshold. If no peak meets the excursion and
threshold criteria, a No Peak Found error (202) is given.
Front Panel
Access:
Search, Next Peak
Marker Peak (Maximum) Right Search
:CALCulate:MARKer[1]|2|3|4:MAXimum:RIGHt
Places the selected marker on the next highest signal peak to the right
of the current marked peak.
Remarks: The marker will be placed at the highest peak that
rises and falls by at least the peak excursion above the
peak threshold. If no peak meets the excursion and
threshold criteria, a No Peak Found error (202) is given.
Front Panel
Access:
Search, Next Pk Right
Marker Peak (Minimum) Search
:CALCulate:MARKer[1]|2|3|4:MINimum
Places the selected marker on the lowest point on the trace that is
assigned to that particular marker number.
Front Panel
Access: Search, Min Search