HP HPE MR Gen11 User Manual

TroubleshootingTroubleshooting: HPE MR Storage Administrator displays information related to drive failures, device failures, and other issues. It also provides
recommendations and displays contextual links, helping you to locate the drives/devices that have issues and troubleshoot them. You can also download a
report of the devices and their configurations, properties, and settings and send it to Hewlett Packard Enterprise Support for further troubleshooting.
Obtain HPE MR Storage Administrator installation files through the Service Pack for ProLiant (SPP), which you can download from the Hewlett Packard
Enterprise website (https://www.hpe.com/servers/spp/downloadhttps://www.hpe.com/servers/spp/download). Be sure to use the latest SPP version for the server.
For more information about the HPE MR Storage Administrator, see HPE MR Storage Administrator User GuideHPE MR Storage Administrator User Guide .
StorCLIStorCLI
The Storage Command Line Interface (StorCLI) tool is the command line management software designed for the HPE MR Gen11 Controller. StorCLI is a command
line interface that is designed to be easy to use, consistent, and easy to script.
Obtain StorCLI through the SPP, which you can download from https://www.hpe.com/servers/spp/downloadhttps://www.hpe.com/servers/spp/download. Be sure to use the latest SPP version for the server.
For more information about StorCLI, see HPE MR StorCLI User GuideHPE MR StorCLI User Guide.
UEFI System UtilitiesUEFI System Utilities
The UEFI System Utilities is embedded in the system ROM. The UEFI System Utilities enables you to perform a wide range of configuration activities, including:
Configuring system devices and installed options
Enabling and disabling system features
Displaying system information
Selecting the primary boot controller
Configuring memory options
Selecting a language
Launching other pre-boot environments such as the Embedded UEFI Shell and Intelligent Provisioning
For more information on the UEFI System Utilities, see UEFI System Utilities User Guide for HPE ProLiant Gen11 Servers and HPE SynergyUEFI System Utilities User Guide for HPE ProLiant Gen11 Servers and HPE Synergy .
For onscreen help, press F1F1.
SubtopicsSubtopics
Using UEFI System UtilitiesUsing UEFI System Utilities
Using UEFI System UtilitiesUsing UEFI System Utilities
To use the System Utilities, use the following keys.
ActionAction KeyKey
Access System Utilities F9 during server
POST
Navigate menus Up and Down
arrows
Select items Enter
Save selections F10
Access Help for a highlighted configuration
option
F1
Scan the QR code on the screen to access online help for the UEFI System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
Upon the first system power-up
After defaults have been restored
Default configuration settings are sufficient for typical server operations. However, you can modify configuration settings as needed. The system prompts you for
access to the UEFI System Utilities each time the system is powered up.
1
1
HPE MR Gen11 Controller User Guide 32

HP HPE MR Gen11 Specifications

General

Category	Controller
Product Name	HP HPE MR Gen11
RAID Levels	0, 1, 5, 6, 10, 50, 60
Form Factor	Low Profile
Storage	SAS/SATA HDD/SSD
Operating System Support	Linux, VMware