HP HPE MR Gen11 User Manual

Making an unconfigured good driveMaking an unconfigured good drive
Making a bootable driveMaking a bootable drive
Assigning a global spare driveAssigning a global spare drive
Unassigning a global spare driveUnassigning a global spare drive
Sanitizing an unconfigured good driveSanitizing an unconfigured good drive
Viewing drive propertiesViewing drive properties
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen11 > Main Menu > Drive Management.
2. In the Drive Management screen, select the drive.
3. In the drive screen, view the basic properties:
PropertyProperty DescriptionDescription
Drive ID ID of the drive
Status Current drive status
Size Size of the drive in MB/GB/TB
Type Device type
Model Model number of the drive
Hardware Vendor Hardware manufacturer
Associated Logical Drive List of logical drives associated with the drive
4. To view advanced properties, click Advanced....
PropertyProperty DescriptionDescription
Certified Whether the selected drive is vendor-certified.
Logical Sector Size Logical sector size of this drive. Possible options are 4 KB or 512 B.
Physical Sector Size Physical sector size of this drive. Possible options are 4 KB or 512 B.
SMART Status Self-Monitoring Analysis and Reporting Technology (SMART) status of a drive. This feature monitors the internal performance of all
motors, heads, and drive electronics to detect predictable drive failures.
Revision Firmware revision of the drive.
Media Errors Physical errors that are detected on the disk media.
SAS Address World Wide Name (WWN) for a drive.
Drive Power State Indicates the power condition (On or Power Save) of the drive.
Cache Setting Disk cache setting of the drive.
Available Size Available size of the drive.
Used Space Configured space of the drive.
Disk Protocol Type of hard disk drive used.
Device Speed Speed of the physical disk.
Negotiated Drive
Transfer Speed
Negotiated link speed for the data transfer to/from the drive.
Number of
Connections
Number of connections of the drive.
FDE Capable Whether the drive is encryption capable.
Data Integrity
Capable
Whether the drive is capable of protection.
Temperature (C) Temperature of the drive.
Locating a driveLocating a drive
ProcedureProcedure
HPE MR Gen11 Controller User Guide 46

HP HPE MR Gen11 Specifications

General

Category	Controller
Product Name	HP HPE MR Gen11
RAID Levels	0, 1, 5, 6, 10, 50, 60
Form Factor	Low Profile
Storage	SAS/SATA HDD/SSD
Operating System Support	Linux, VMware