HP HPE MR Gen11 User Manual

Making a JBODMaking a JBOD
About this taskAbout this task
WARNING:WARNING: Converting a drive to JBOD will permanently delete any data on the drive.
ProcedureProcedure
1. Select System Configuration > HPE MRXXX Gen11 > Main Menu > Drive Management.
2. In the Drive Management screen, select the Unconfigured Good drive that you want to convert to JBOD.
3. In the drive screen, select the Make JBOD from the Operation drop-down menu.
4. Click GO.
The Success screen appears to confirm that the operation is complete. For the drive status change to reflect on the Drive Management screen, refresh the
view.
Making an unconfigured good driveMaking an unconfigured good drive
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen11 > Main Menu > Drive Management .
2. In the Drive Management screen, select the JBOD drive that you want to convert to Unconfigured Good.
3. In the drive screen, select Make Unconfigured Good from the Operation drop-down menu.
4. Click Go.
The Success screen appears to confirm that the operation is complete. For the drive status change to reflect on the Drive Management screen, refresh the
view.
Making a bootable driveMaking a bootable drive
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen11 > Main Menu > Drive Management.
2. In the Drive Management screen, select the drive that you want to use as a bootable drive.
3. In the Drive screen, select Make Bootable Drive from the Operation drop-down menu.
4. Click Go.
The Success screen appears to confirm that the operation completed successfully. For the status change to appear in the Drive Management screen, refresh
the view.
5. Review the warning message and click Confirm and Yes to proceed.
Assigning a global spare driveAssigning a global spare drive
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen11 > Main Menu > Drive Management.
2. In the Drive Management screen, select the drive that you want to use as a global spare drive.
3. In the drive screen, select Assign Global Spare Drive from the Operation drop-down menu.
4. Click Go.
The Success screen appears to confirm that the operation completed successfully.
5. Review the warning message and click Confirm and Yes to proceed.
Unassigning a global spare driveUnassigning a global spare drive
ProcedureProcedure
HPE MR Gen11 Controller User Guide 48

HP HPE MR Gen11 Specifications

General

Category	Controller
Product Name	HP HPE MR Gen11
RAID Levels	0, 1, 5, 6, 10, 50, 60
Form Factor	Low Profile
Storage	SAS/SATA HDD/SSD
Operating System Support	Linux, VMware