HPE Smart Storage Hybrid Capacitor is a battery-free technology for power storage while eliminating the environmental impact of lithium-ion batteries. It
supports up to three MR416 storage controllers. The time required to recharge takes less than one minute. For more information, see HPE Smart Array HybridHPE Smart Array Hybrid
Capacitors QuickSpecsCapacitors QuickSpecs.
Storage referenceStorage reference
SubtopicsSubtopics
Memory and storage capacity conventionsMemory and storage capacity conventions
RAID conventionsRAID conventions
Memory and storage capacity conventionsMemory and storage capacity conventions
Memory capacities are specified using binary prefixes:
KiB = 2 bytes
MiB = 2 bytes
GiB = 2 bytes
TiB = 2 bytes
Storage capacities are specified using SI prefixes:
KB = 10 bytes
MB = 10 bytes
GB = 10 bytes
TB = 10 bytes
Older and other documentation might use SI prefixes for binary values.
Actual available memory capacity and actual formatted storage capacity for devices are less than specified values.
RAID conventionsRAID conventions
Hewlett Packard Enterprise uses the following naming convention for RAID levels:
RAID 0
RAID 1
RAID 10
RAID 5
RAID 50
RAID 6
RAID 60
RAID 50 and RAID 60 are also known in the industry as RAID 5+0 and RAID 6+0, respectively.
WebsitesWebsites
General websitesGeneral websites
WebsitesWebsites LinksLinks
Hewlett Packard Enterprise Support Center
https://support.hpe.com/hpesc/public/homehttps://support.hpe.com/hpesc/public/home
Hewlett Packard Enterprise Worldwide
https://www.hpe.com/assistancehttps://www.hpe.com/assistance
Subscription Service/Support Alerts
https://www.hpe.com/support/e-updateshttps://www.hpe.com/support/e-updates
Hardware RAID controllersHardware RAID controllers
10
20
30
40
3
6
9
12
To Next Page
Loading...
Need help?
General
