Figure 2-5 Install diagnostic tools
11. EBSU displays the partition confirmation window. Select Continue and press Enter.
12. EBSU prompts you to insert the Microsoft Windows Server 2003 with SP2 CD in the DVD
drive. Insert the CD and press Enter.
Figure 2-6 Insert the Microsoft Windows Server 2003 CD
Run Windows Setup
Windows Setup prompts you to create a system partition on the boot disk if needed, copies the
OS files on to that partition, and attempts to reboot from the boot disk. To run Windows Setup,
complete the following steps:
1. Insert the Microsoft Windows Server 2003 with SP2 CD in the DVD drive, and Windows
Setup launches. Press Enter to start the installation.
NOTE: If you are installing an HP Virtual Machines (HPVM) Windows guest, you also
need to issue an IN command (for “insert”) from the HPVM console menu every time you
insert a disc. If you forget to do this, the server does not recognize the disc and appears to
hang.
2. Windows Setup prompts you to select Express Install. Select Express Install by pressing
Enter.
38 Installing the OS
To Next Page
Loading...
Need help?
General