8. At the prompt, enter the following path:
EFI\Microsoft\Winnt50\boot0001
This creates the Windows boot file boot0001.
Verify successful boot file creation
To verify that the boot file was created successfully, use the following procedure:
1. Select EFI Shell[Built-in] from the EFI Boot Manager.
2. Enter fs0: at the EFI Shell prompt.
3. Enter cd MSUTIL at the fs0:> prompt.
4. Execute the NVRBOOT.EFI boot utility at the fs0:\MSUTIL> prompt.
5. Enter I to Import.
6. Enter the following path:
EFI\Microsoft\Winnt50\boot0001
7. Click Exit to return to the EFI Boot Manager utility.
8. Boot the server using the new Windows entry.
Creating a new boot file using the EFI Shell 87
To Next Page
Loading...
